Mag Meters Approved for Use in Hazardous Areas

Specifying the correct flow meter for any application is important but becomes absolutely critical in potentially explosive environments. In these situations only meters with the correct ratings and genuine certification must be specified.

Renowned for their innovative flow meter design, Badger Meter have developed a range of intrinsically safe electromagnetic flow meters, sizes 6 – 600mm. Tested and certified to ATEX, CSA and FM, the ModMag M3000 and M4000 offer the ideal solution for applications requiring accurate flow measurement in hazardous environments.


Incorporating the latest developments in micro processing signal conditioning, the M3000 and M4000 have an accuracy of better than ±0.25% with a flow range of 0.03 to 12 m/s. Targeted to a variety of industrial and offshore applications, these full bore meters are virtually unaffected by density, temperature, pressure, and viscosity changes and provide an accurate and reliable long term metering solution for a variety of conductive fluids.

The ruggedly constructed modular design allows flow measurements in Ex-zones  1 (M4000) and 2 (M3000), in either compact format or remote display version. The amplifier housing, made of powder-coated aluminium, is approved to ingress protection class IP67. Programming can be done either with a closed housing thanks to a magnetic pen or with an open housing via three buttons. The four-line display shows all necessary data including actual flow, totalizer and status messages. A selection of outputs are featured, including Analogue, Pulse and Alarms.

The ModMag M3000 and M4000 are perfectly suited to a range of hazardous applications where accurate flow rate and totalising of conductive fluids are required. Click for more information and to buy.


Comments

Post a Comment

Popular posts from this blog

IRON-75 Fuel Transfer Pump

Image
Built to last.... IRON-75 Fuel Transfer Pump from European manufacturer Gespasa.  High quality self-priming, 75 Litres/min diesel pump available from Bell Flow Systems.  Buy on-line here   IRON-75 Self-priming. Eccentric self-adjusting blades With recirculation bypass ATEX models available here>>:  Suction: 5m · Delivery: 30m Free flow: 75 l/min Consumption: 1.9-4.5 Amps Motor: 0.5 kW 230 VAC self-ventilated 50/60 Hz single-phase with thermal cut-out protection S1 Continuous duty IP-55 Protection 3000 rpm Connection through 1"(BSP) threads and flange option It has built-in steel filter of 350 µm (micron). ON/OFF luminous switch with IP-55 protection 3m electric cable  Anti-corrosion treatment Also available as a wall-mount or drum mount fuel transfer kit :
Read more

GWR200 Flow Sensor from APG

Image
Bell Flow Systems are pleased to introduce the new GWR200 flow sensor from APG, which promises to take the problems and frustration out of your level measurement. The Systems True Echo™ Communication Tool, which provides a Modbus-to-USB connection for communication with True Echo™ Software allows for advanced configuration and monitoring of multiple True Echo™ sensors. Specifications includes an auto calibration for easy setup with the True Echo™ software, a robust IP65 ingress protection housing, innovative signal processing and disturbance signal suppression and featuring a range up to 10 feet with SS rod, 80 feet with cable. Additionally, the sensors are unaffected by foam, vapours or dust. The Sensor NEMA 6 housing comes as standard, and its 316 SS or PFTE-coated 316 SS probes can operate in process temperatures from -40° to 203°C. Robust and reliable, the GWR200 sensor makes difficult level measurements easy. With a programmable 4-20 mA or RS-485 Modbus outputs, and innovativ
Read more

Introducing the New Wireless Rain Gauge

Image
Bell Flow Systems are pleased to introduce the ARG100 rain gauge into their range of environmental measurement products.  The ARG100 is a cost effective solution for precipitation measurement. The aerodynamic design ensure that the sensor does not interfere with the surrounding airflow ensuring that accurate measurement of precipitation is continuously achieved. The U.V resistant materials ensure robustness in the field to maintain a high level of measurement accuracy. In standard form the rain gauge is offered with a 0.20mm per tip pulse output, however additional options are available. Measurement of rainfall is achieved using a traditional “tipping bucket” mechanism which has been proven as a reliable industry and scientific standard for the measurement of precipitation for many years. Each tip of the bucket provides a contact closure of a reed switch to create an output from the rain gauge. The output from the ARG100 can easily be connected directly to our OM-CPPULSE101 f
Read more