Insertion Flow Meters from Impeller

The Impeller series from Badger Meter - USA is a range of insertion style flow sensors designed to measure water and chemicals via insertion through the pipe wall.

Fitting an insertion meter is simpler, faster and cheaper than cutting a section from the pipework to install a full-bore flow meter.

Featuring a closed, six-bladed impeller design, using a proprietary, non-magnetic sensing technology, these meters offer high repeatability at lower flow rates. Sensors can be interchangeable, eliminating the need for recalibration after service or replacement.



Impeller flow meters are available in a choice of construction materials and a variety of sizes and outputs or LCD displays. With an accuracy of +/-1% and flow rates up to 9 m/s and up to 69 bar, depending on model, the Impeller series makes an ideal choice for use with corrosive and non-corrosive fluids even at higher system pressure.

Comments

Post a Comment

Popular posts from this blog

IRON-75 Fuel Transfer Pump

Image
Built to last.... IRON-75 Fuel Transfer Pump from European manufacturer Gespasa.  High quality self-priming, 75 Litres/min diesel pump available from Bell Flow Systems.  Buy on-line here   IRON-75 Self-priming. Eccentric self-adjusting blades With recirculation bypass ATEX models available here>>:  Suction: 5m · Delivery: 30m Free flow: 75 l/min Consumption: 1.9-4.5 Amps Motor: 0.5 kW 230 VAC self-ventilated 50/60 Hz single-phase with thermal cut-out protection S1 Continuous duty IP-55 Protection 3000 rpm Connection through 1"(BSP) threads and flange option It has built-in steel filter of 350 µm (micron). ON/OFF luminous switch with IP-55 protection 3m electric cable  Anti-corrosion treatment Also available as a wall-mount or drum mount fuel transfer kit :
Read more

GWR200 Flow Sensor from APG

Image
Bell Flow Systems are pleased to introduce the new GWR200 flow sensor from APG, which promises to take the problems and frustration out of your level measurement. The Systems True Echo™ Communication Tool, which provides a Modbus-to-USB connection for communication with True Echo™ Software allows for advanced configuration and monitoring of multiple True Echo™ sensors. Specifications includes an auto calibration for easy setup with the True Echo™ software, a robust IP65 ingress protection housing, innovative signal processing and disturbance signal suppression and featuring a range up to 10 feet with SS rod, 80 feet with cable. Additionally, the sensors are unaffected by foam, vapours or dust. The Sensor NEMA 6 housing comes as standard, and its 316 SS or PFTE-coated 316 SS probes can operate in process temperatures from -40° to 203°C. Robust and reliable, the GWR200 sensor makes difficult level measurements easy. With a programmable 4-20 mA or RS-485 Modbus outputs, and innovativ
Read more

Introducing the New Wireless Rain Gauge

Image
Bell Flow Systems are pleased to introduce the ARG100 rain gauge into their range of environmental measurement products.  The ARG100 is a cost effective solution for precipitation measurement. The aerodynamic design ensure that the sensor does not interfere with the surrounding airflow ensuring that accurate measurement of precipitation is continuously achieved. The U.V resistant materials ensure robustness in the field to maintain a high level of measurement accuracy. In standard form the rain gauge is offered with a 0.20mm per tip pulse output, however additional options are available. Measurement of rainfall is achieved using a traditional “tipping bucket” mechanism which has been proven as a reliable industry and scientific standard for the measurement of precipitation for many years. Each tip of the bucket provides a contact closure of a reed switch to create an output from the rain gauge. The output from the ARG100 can easily be connected directly to our OM-CPPULSE101 f
Read more